C30/1250KMB CARB Toroidal Roller Bearing 1250*1750*375mm

Days to Ship:7 Days; Shape:Flanged Pilot Type; Bearing Part Number:626; Width T(mm):35 ～ 45; Seals:ZZ (Double Shield); Number of Bearings:Double; Bearing Retained:No; RoHS:6; Shape:Flanged Pilot Type; Housing Material:[Aluminum Alloy] 201;

D1 - Flange Outer Diameter:19.5586 in; C - Cup Width:1.7500 in; r - Cup Backface To Clear Radius1:0.270 in; Series:203000; C1 - Cup Flange Width:0.5625 in; Design Units:Imperial; D:19.0000 in; Cup Part Number:203190-B; Da - Cup Frontface Backing Diameter:18.39 in; Cg - Geometry Factor5:0.178;

e - ISO Factor8:0.32; C1 - Dynamic Radial Rating (1 million revolutions)5:219000 lbf; R - Cone Backface To Clear Radius1:0.280 in; D1 - Flange Outer Diameter:11.8084 in; G2 - Heat Generation Factor (Rib-Roller End):101; Cone Part Number:HM237542; C - Cup Width:1.8750 in; K - Factor7:1.83; T1 - Beari

Bearing Part Number:6000; Number of Bearings:Single; Height H(mm):15 ～ 40; Width T(mm):15; C Chamfered:Not Provided; Shape:T-Shaped; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Shape:T-Shaped;

Height Indication:Height Configurable; Bearing Retained:Yes (with retaining; Shape:L-Shaped; Holder Surface Treatment:Clear Anodize; Bearing Part Number:6003; Shape:L-Shaped; Height H(mm):30 ～ 50; RoHS:6; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea;

H1:95.0 mm; UPC Code:999999999; Bolt Qty:2; Max Oil Speed:4500; Cage Type:EJ; J1:50 mm; C1 Dynamic Load Rating:292; A:125.00 mm; Bearing:21314; J2:292 mm;

Fillet Radius/Chamfer:7.5 mm; Roller Profile:Symmetric; Axial Load Factor Y0:2.15; d:560 mm; Limiting Speed - Oil:480 rpm; da (min):596 mm; Weight:732.000 kg; ra (max):6 mm; Radial Clearance:0.280 to 0.440 mm; Retainer Material:Machined Brass;

Housing:SNT 505; H2:19.00 mm; Shaft Diameter d:20 mm; Max Grease Speed:9200; A1:46 mm; A2:80 mm; UPC Code:999999999; C1 Dynamic Load Rating:50.6; N1:20.00 mm; Housing Mass:1.5 Kg;

Series Type:Light Series; Bearing UPC:013992026774; Dimension H2:12.4 in; Note:This product line wa; Maximum Speed:1970 rpm; Seal Type:Felt Type; Pillow/Plummer Block Style:Split Cylindrical Ho; Bolt Size:2 x M24; Support Type:Two-Bolt Plummer Blo; Cr - Dynamic Load Rating:71040 lbf;

Bearing Retained:Yes (with retaining; Bearing Part Number:6002; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Width T(mm):15; Bearing I.D. d(mm):15; Holder Surface Treatment:Electroless Nickel P; Days to Ship:8 Days; Height H(mm):30 ～ 50; Mount Type:Base Face Type;

d:65; Days to Ship:6 Days; Size Standards:Metric System; B:33; Type:Ball; Inner/Outer Ring Material:Steel; Seal, Shield Symbols:LLU; Precision:Grade 0; Preload Mark:CM; Retainer Type:Punching;

Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):35; Flange O.D. H(φ):126; Number of Bearings:Double; Bearing Material:[Steel] Steel; Shape:Flange Type; Width T(mm):55 ～ 120;

Cg - Geometry Factor8:0.0662; Design Unit:METRIC; Cage Material:Brass; e - ISO Factor3:0.32; d:85 mm; D:179.993 mm; B - Outer Ring Width:60 mm; Superseded Part:22317YMW800; Reference Thermal Speed Rating (Oil)7:3500; B - Inner Ring Width:60 mm;

Lateral Width L(mm):49; Height H(mm):15 ～ 30; Thickness, Height Indication:T Selection, h Confi; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Housing Material:[Aluminum Alloy] Alu; Bearing Part Number:626; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:No;

Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Retained:No; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Flange O.D. H(φ):56; Bearing Retained:No; Bearing Part Number:6201; Number of Bearings:Double; Bearing I.D. d(mm):12;